Automotive Engine Oil Pressure Switch 0C3025 0G6820 1/4''-18 Compatible with Generac Guardian GT990 GT760 Engine

Item Descriptions:-MPN: 0G6820, 0C3025. Which is a 10 PSI oil pressure switch designed specifically for generators.-This switch is compatible with Generac Guardian series and GT990, GT760 and other engine models, and is used to replace faulty switches to ensure automatic protection shutdown of the generator in case of insufficient oil pressure.-Its core function is to monitor the engine oil pressure. When the oil pressure drops below the preset critical value of 10 PSI, the normally closed contacts inside the switch will open, sending a signal to the control system to trigger an alarm or shutdown.-Important parameters include trigger pressure of 10 PSI and installation thread specification of 1/4 "-18, with a typical installation torque of 15-20 ft lbs to ensure sealing.-The shell is made of metal material, the internal contact structure is precise, and the interface end is equipped with a sealing ring. Before installation, it is necessary to clean the threaded holes, wrap the raw material tape, tighten it, and connect the wires.Package:1x Generator Oil Pressure SwitchItem Specifications:MPN:0G6820, 0C3025Critical value:10 PSIThread:1/4 "-18Material:MetalOverall dimensions:61.5x36.8mm

• MPN: 0G6820, 0C3025. Which is a 10 PSI oil pressure switch designed specifically for generators.
• This switch is compatible with Generac Guardian series and GT990, GT760 and other engine models, and is used to replace faulty switches to ensure automatic protection shutdown of the generator in case of insufficient oil pressure.
• Its core function is to monitor the engine oil pressure. When the oil pressure drops below the preset critical value of 10 PSI, the normally closed contacts inside the switch will open, sending a signal to the control system to trigger an alarm or shutdown.
• Important parameters include trigger pressure of 10 PSI and installation thread specification of 1/4 "-18, with a typical installation torque of 15-20 ft lbs to ensure sealing.
• The shell is made of metal material, the internal contact structure is precise, and the interface end is equipped with a sealing ring. Before installation, it is necessary to clean the threaded holes, wrap the raw material tape, tighten it, and connect the wires.